Studijos monitoriai Archives - Digital Audio

C5-REFERENCE studijos monitorius

administrator — Wed, 27 Jun 2018 08:53:35 +0000

For over 10 years, the C-Line has been the compact listening reference in many studios around the world. One of the main reasons for this is the coaxial principle that delivers exact information to the sound engineer even if the room’s acoustics are not ideal. A coaxial chassis avoids different run-times between bass and high-ranges. Firstly, this means that one can sit at any distance from the sound source, and secondly, much more direct sound arrives at the listening position than is reflected from the room, which is the ideal solution for smaller listening spaces, transmission vans or in the near field at a DAW workstation. Additionally, the KSD Reference series has now been fitted with patented Firtec/DSP that not only guarantees neutral tonality but also correctly timed reproduction. This phase linearity permits the exact positioning of individual instruments in the virtual stereo sound stage, with each instrument precisely positioned. Six user filters serve to adjust the set-up in one’s own studio. An optional remote control (“KSD-RC”) allows not only the access to the user EQ’s and other parameters like “delay” etc. but also allows simple adjustment of the volume and replaces an external monitor controller (with its signal editing and sound losses). Available with a cherry wood front or in complete black.

C8-REFERENCE studijos monitorius

administrator — Wed, 27 Jun 2018 09:02:57 +0000

As a genuine midfield monitor the C8 Reference allows a listening distance from approx. 50cm up to several meters. The available performance in combination with cabinet volume and the newly developed high-performance chassis offers the sound engineer a full-range, main monitor for small to medium size areas. In this way, a sub-woofer is unnecessary to control the entire frequency range. The special form of the rear-directed bass reflex port prevents audible air turbulence. The carbon fibre membrane of the newly developed 8″ coaxial chassis prevents the usual break-out of the conus up to higher frequencies at the same time having an extremely low weight. The 1″ self-manufactured tweeter offers the lowest harmonic distortion with a maximum in neutrality. The special coaxial design of the tweeter leads to an optimised radiation behaviour.

C88-REFERENCE studijos monitorius

administrator — Wed, 27 Jun 2018 09:09:24 +0000

The C88 Reference has been developed as a main monitor but can be utilized at very low listening distances (from approx. 1 meter) due to its coaxial chassis. The additional bass chassis serves the lowest octave and relieves the coaxial chassis in that range. The carbon fibre membrane of the newly developed 8″ coaxial chassis prevents the usual break-out of the conus up to higher frequencies, while being extremely light-weight at the same time. The 1″ self-manufactured tweeter offers lowest harmonic distortion with maximum neutrality. Placed just in front of the 8″ chassis, the specially constructed conus, leads to an optimised radiation behaviour and prevents an unstable sound image, as even with higher volumes the hub of the bass chassis doesn’t influence the radiation behaviour of the tweeter.

B88 žemų dažnių kolonėlė

administrator — Wed, 27 Jun 2018 09:26:48 +0000

The new, super-compact B88-REFERENCE monosubwoofer has been developed as a bass extension for the Reference series, all KSD monitors and monitors from other manufacturers. The integrated digital signal processing in combination with the two power amplifiers extends existing monitoring systems by the lowest octave. Two 250W PWM amplifiers operate DSP-controlled on two high-performance eight-inch chassis. Two XLR high-pass outputs allow connection of the satellite monitors with the appropriate signal above 80Hz. This results in a controlled and powerful reproduction of the deep bass – without any rumbling or pumping – with a stress-free, detailed reproduction of the bass-free satellite speakers. The digital signal processor linearizes the frequency response, internal filters allow fine tuning to the room and the application area. The delay, which can be set directly on the knob, compensates for any spatial offset between the B88-REFERENCE and the satellites. The special high-performance drivers in the flow-optimized steel housing produce an extremely controlled,’ dry’ bass signal for full sub-end control without the usual ventilation noise.

KSD B210 žemų dažnių kolonėlė

administrator — Wed, 27 Jun 2018 08:25:57 +0000

The KSD-B210 is an active, DSP driven, 10” double subwoofer with a total of 500W amplifier power. Two completely independent amplifier paths each drive a 10” high performance chassis in an individual bass chamber. This construction in connection with the DSP supported driver enables various operating modes.

ASP510 monitorių kontroleris

administrator — Tue, 03 Jul 2018 11:23:01 +0000

The ASP510 is a remote operated rack unit connected via a standard CAT-5 cable. All signal processing and operation takes place in a 1RU rack unit, which has a whisper quiet fan – ideal for being located in your control room without disturbing your listening environment. Controlled by an ergonomic and compact remote designed to sit on your console or desktop without cluttering your setup, ASP510 will fit effortlessly into your workflow and will quickly provide you with intelligent control over your mixes.

ADM22 MK2 studijos monitorius

administrator — Wed, 27 Jun 2018 08:16:07 +0000

The ADM22 represents a complete upgrade of the legendary ADM 20, the first digital, linear phase studiomonitor worldwide. In this upgrade, all important reproduction functions of the ADM20 were taken over andfitted to the new cabinet. Therefore the ADM22 also processes the signal digitally with its own DSP platform.

ADM25 studijos monitorius

administrator — Wed, 27 Jun 2018 08:21:08 +0000

The ADM25 is conceived as a stand speaker to be set up directly behind the mixing deskor the work station – work place. Both the emitting properties of the chassis workingin the ADM25 and the acoustic baffle of the stand casing tilted at 5° allow excellentuse of the ADM25 in the near and midfield area. A D’Apollito arrangement with verystrongly coupled sound centres of the individual chassis, connected with the high rangewave guide concentrate the energy in the area 90°x 60° (H x V). In this way the monitor room is lessstimulated and therefore control is significantlyincreased. The acoustic baffle tilted at 5° decreasesreflections on the desk or work space and preventsunwanted excessive presence. The FIRTEC™ tech-nology linearises frequency and phase response atthe listening place and therefore ensures a tonallyand temporally correct, neutral playback of theacoustic signal. The freely adjustable parametricEQ’s as well as high and low shelving filters allowa precise adjustment to the set up position andthe acoustics of the listening place. This completepackage ensures true to detail, time correct infor-mation at the work place of the engineer

A200 studijos monitorius

administrator — Wed, 27 Jun 2018 08:06:39 +0000

The A200 was conceived as a compact 3-way reference monitor with FIRTEC™ managed time-aligned sound reproduction. As with the legendary ADM20, all frequencies are radiated by the A200 so that they simultaneously arrive – not out of sync – at the ear of the sound engineer. The tonal neutrality and this time alignment permit its use in all areas of professional production processes, from the recording as a mix-monitor or in mastering as a last reference. The assembly with an 8” carbon bass driver and a calotte-free, 1” high frequency driver transmits from 32Hz upwards and thereby offers in every tonal region an absolute of information. The conception of the amplifier and power supply ensure a low noise reproduction with virtually no distortion. Our patented FIRTEC system filter generates a linear phase, time aligned reproduction across the entire frequency range. The HT wave guide suppresses the cabinet edges and also linearizes the frequency range for digital signal processing. The implemented 1” high range ring radiator ensures a low distortion reproduction, even at a high volume, irrespective of whether connected via its analogue input with a 24 bit / 192 KHz AD-converter or digitally connected loss-free to a workstation.

Result6 aktyvūs studijos monitoriai

administrator — Wed, 27 Jun 2018 10:51:12 +0000