Pradžia - Namų garsas - Įranga namų garsui - Integruoti stiprintuvai - HINT6 integruotas stiprintuvas
HINT6 integruotas stiprintuvas
New Features (Changes from the original Halo Integrated)
- Burr Brown analog resistor ladder volume control
- Dimmable front panel volume display
- Updated USB receiver is Plug and play with Windows 10 and MAC
- An additional optical input (2 total)
- Ball bearing supported solid aluminum volume knob
- Programable default turn on volume setting
- Favorite volume memory with remote control button
- Increased phono stage gain for lower output cartridges
- Improved Left/Right channel separation and balance tracking
- Updated cosmetics with subtle gold highlights
Preamp and DAC Features
- ESS Sabre32 Reference DAC (ES9018K2M)
- Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
- USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
- Coax and optical inputs accept PCM up to 192kHz/24-bit
- Analog bass management with high & low pass crossovers
- Home theater bypass input for surround sound integration
- Front panel subwoofer level control
- Dedicated high current headphone amplifier (TI TPA6120)
- Phono input for MM, MC and MI with 100 Ω or 47k Ω load
- Front panel Aux input with automatic +12 dB gain stage
- 5 pairs RCA line level Analog inputs
- 1 pair XLR balanced Analog input
- Balanced XLR and RCA left and right preamp outputs
- 1 balanced XLR and 2 RCA subwoofer outputs
- Bass & treble controls with relay bypass from remote or front panel
- Rear panel IR input and IR loop output jacks
- 12 Volt trigger output
- Back-lit remote control with discrete buttons
- 0.5w standby power consumption meets Energy Star & EU specs
Power Amp Features
- 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
- 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
- Power amp circuit topology designed by legendary John Curl
- Direct amplifier input to bypass preamp section
- High bias class A/AB operation
- Oversized shielded toroid power transformer
- Dual-mono power supply and power amplifier
- 40,000uF power supply filter capacitance
- Matched JFET input stages and MOSFET driver stages
- 12 high voltage/high current bipolar output transistors
- Heavy-duty 24k gold-plated 5-way speaker binding posts
- Over temp and short circuit relay protection
Techninė specifikacija:
(0.09% THD, 20 Hz – 20 kHz); 180 watts x 2 @ 8 Ω RMS; 270 watts x 2 @ 4 Ω RMS
45 amps peak per channel
10 Hz – 100 kHz, +0/-3 dB; 20 Hz – 20 kHz, +0/-0.5 dB
< 0.01 %, average listening levels; < 0.05 %, 160 watts x 2 @ 8 Ω
> 70 dB at 20 kHz; > 78 dB at 1 kHz
Line in: – 103 dB (input shorted); Digital in: – 106 dB
> 800 at 20 Hz
300 mV in for 1 V at Preamp Output jacks
10 dB
7 V
9 V
1 V at Bypass/Amp In for 28 V at Speaker Out
28 dB
MM: 41 dB / 47 k Ω; MC: 54 dB / 47 k Ω or 100 Ω
12 dB per octave
USB: up to 384 kHz / 32-bit PCM; DSD Native: DSD 64, DSD 128, DSD 256; DSD over PCM (DoP) at 384 kHz
up to 192 kHz / 24-bit PCM
ESS Sabre32 Reference ES9018K2M; 384 kHz / 32-bit
Savitech SA9227, 384 kHz / 32-bit
Texas Instruments TPA6120A Output Impedance 10 ohms
Unbalanced: 24 k Ω; Balanced: 100 k Ω per leg
Unbalanced: 100 Ω; Balanced: 470 Ω per leg
Width: 437 mm; Depth: 413 mm; Height, with feet: 150 mm
15 kg
Standby: 0.5 watts; Idling power: 70 watts; Maximum: 750 watts
