• PMC8 SUB žemų dažnių kolonėlė
  • PMC8 SUB žemų dažnių kolonėlė
  • PMC8 SUB žemų dažnių kolonėlė
  • PMC8 SUB žemų dažnių kolonėlė
  • PMC8 SUB žemų dažnių kolonėlė
  • PMC8 SUB žemų dažnių kolonėlė
  • PMC8 SUB žemų dažnių kolonėlė
  • PMC8 SUB žemų dažnių kolonėlė

PMC8 SUB žemų dažnių kolonėlė

3309 €


The PMC8 SUB is a true low-frequency reference monitor which extends the bass response of your speaker system, imparting more of our signature ultra-clean, ultra-fast low end to any setup.

The PMC8 SUB can be used as a compact stand-alone subwoofer within conventional multichannel systems, or as an XBD cabinet, creating a full-range PMC6 XBD midfield monitor. When used in this way, the dedicated ‘XBD’ DSP mode marries the speakers and sub unit together, creating a coherent full-range system. Our subs are also perfectly suited to use in multi-channel and immersive systems, as our ATL™ bass-loading technology provides a gentler low-order LF roll-off than conventional ported cabinets, allowing a smoother, seamless integration between the height and surround channels and the sub.

Featuring one custom eight-inch long-throw bass-driver, the PMC8 SUB is powered by a single 300W Class-D amplifier and controlled by the same powerful DSP engine as our other active models. DSP facilities include sophisticated room boundary equalisation options, parametric EQ, time delay, phase inversion, and the unique XBD mode, all configured via the loudspeaker’s rear panel or the browser-based SoundAlign™ software.

  • Active subwoofer with an 8-inch bass driver and ATL™ bass loading
  • Frequency response: 25Hz – 500Hz (- 3dB) (@1m full space, on-axis)
  • Max. cont. SPL: 109dB @1m (quarter space value calculated as +3dB from half space measurement.
    Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifier: 300W
  • Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP driver protection, EQ, and delay/phase options
  • Dedicated XBD configuration mode

Techninė specifikacija

Type
Active subwoofer with an 8-inch bass driver and ATL™ bass loading

Drive Unit Complement
LF PMC 200mm (8”) studio 8 driver

Effective ATL™ Length
3m (9.8ft)

Frequency Response
25Hz - 500Hz (- 3dB) (@1m full space, on-axis)

Sensitivity
+4dBu input signal = 98dB SPL @ 1m

Max continuous SPL
109dB @1m

Max Peak SPL
121dB @1m

Input
XLR switchable between analogue & digital AES3

Analogue input
- +20/+24dBu max. input level (selectable); - 22K ohm input impedance

Digital input
- 16/24-bit AES3 signal, left, right or left + right; - 18 - 192kHz Sample Rate; - 110 ohm input impedance

Output
XLR digital AES3 (fixed 24-bit @ 96kHz)

Features
Level Trim (+/-10dB)

High-pass/Low-pass filter (20 - 200Hz, 12dB/Oct)

Delay (0 - 30mS)

LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)

Amplifier power
300Wrms

Mains
100 - 240VAC auto-switching, 50-60Hz (IEC C14)

Power consumption (idle)
25W

Power consumption (max)
300W

Cabinet dimensions
H 266mm (10.5”); W 551mm (21.7”); D 440mm (17.3”)

Weight
18.5kg (40.8lbs) each

Available Finishes
Studio black

PMC8 SUB žemų dažnių kolonėlė

PMC8 SUB žemų dažnių kolonėlė - Digital Audio

3309 €