• RS 500 žemų dažnių stiprintuvas
  • RS 500 žemų dažnių stiprintuvas
  • RS 500 žemų dažnių stiprintuvas
  • RS 500 žemų dažnių stiprintuvas
  • RS 500 žemų dažnių stiprintuvas
  • RS 500 žemų dažnių stiprintuvas

RS 500 žemų dažnių stiprintuvas

Audiocontrol
2129 €

RS 500

Subwoofer Amplifier

The AudioControl RS 500 DSP controlled subwoofer amplifier is the ultimate bass amplification solution for any home cinema, multi-zone audio, or 2.1 channel music system.

The RS Series amplifiers deliver constant power at all common impedances. Like other models in the AudioControl lineup, RS Series amplifiers offer IP and IR control, as well as loop outputs with an optional high-pass filter.

These features, coupled with the power of AudioControl’s multi-award-winning DSP engine that puts graphic and parametric EQs, crossover, delay and phase control at your fingertips for precise calibration and tuning, make the RS Series amplifiers a definitive choice to power any subwoofer in entertainment systems that demand the very best.

Features


  • 500 Watts at 8/4/2 Ohms
  • Digital Signal Processing (DSP) Performance
  • Six-band Graphic EQ
  • Eight-band Parametric EQ
  • Crossover with Subsonic Filter
  • Built-In Speaker Optimization Profiles
  • Ethernet Port for Status Monitoring, Source Switching and 12 Volt Trigger Control
  • Network Programmable Graphic & Parametric Equalization with User Memories
  • Digital Signal Sense
  • AudioControl LightDrive Anti-Clipping Speaker Protection
  • Balanced Inputs/Thru
  • Unbalanced Input/Thru
  • LFE Input/Thru
  • Speaker Level Inputs
  • Home and Commercial Installations

Techninė specifikacija:

Audio Inputs

1 Balanced, 2 Unbalanced, 1 LFE, 2 Speaker Level


Nominal sensitivity

0.5V to 4V (user selectable)


Signal to Noise (A-wtd ref full output)

98 dB


Frequency Response

15 Hz – 350 Hz


Amplifier Channels

1


Continuous power output

500W


Minimum Speaker Load

2Ω


Loop/Thru Audio Outputs

1 Balanced, 2 Unbalanced, 1 LFE


Total Harmonic Distortion

0.1%


Remote Power Trigger

+12 VDC or Dry Contact Closure


Network Connection/Protocol

10BaseT Ethernet TCP/IP


Communication Protocol

HTTP or Telnet


12 Volt Trigger Outputs

1


IR Receiver Inputs

1


Dimensions (including terminals and feet)

17”W x 17.5”D x 1.75”H (1U)


Weight

6.8 kg


RS 500 žemų dažnių stiprintuvas

RS 500 žemų dažnių stiprintuvas

Audiocontrol
2129 €